Rako Wireless 45 Constant Current Dimming Module - RLED45CC1

The module is connected in-line before the first fitting and can control up to 13 LEDs in series (note: some fittings may use multiple LEDs, if in doubt refer to Rako's technical department) with a maximum wattage of 45W
Controlled from any Rako,Rakom device, e.g. RCM wall plates or Bridge interface units.

• Designed to fit through a ceiling cut-out of 50mm diameter or greater the RLED45CC1 is fed from a suitable DC power supply to provide an adequate forward voltage. The RAPSU48 is recommended.
• The unit can also be used for exterior lighting control applications with the use of a weatherproof IP rated enclosure.
• Programmed using either an RCM RF wallplate or the RASOFT Software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non volatile memory.
• The RLED45CC1 dimmer can be controlled from any Rako transmitter such as RCM wallplates, RAH hand helds and Bridge modules and forms the foundation of any Rako scene-set system.