Rako Wireless Three Channel (RGB) Constant Current LED Dimmer - RLED20CC3

When used with 3 colour fittings each colour is allocated a channel and can be individually adjusted allowing complete colour mixing. Simple colour cycling is started/stopped using the raise/lower buttons in a Rako wall panel or hand held remote.
Controlled from any Rako, Rakom device, e.g. RCM wall plates or Bridge interface units.

• Designed for use with 3 channel constant current LED fittings.
• Maximum wattage of 20w with a forward voltage range of 3-45V (equates to 13 x 1w LEDs per channel). Requires a suitable external d.c. power supply such as the Rako RAPSU48. Selectable current ratings of 350, 500, 600 and 700mA via jumper connectors.
• Current Output:  350mA 13, 600mA 10 ,700mA 9, Table shows max no. LEDs per channel.
• Programmed using either an RCM RF wallplate or the RASOFT Software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non volatile memory.
• The RLED20CC3 dimmer can be controlled from any Rako transmitter such as RCM wallplates, RAH hand helds and Bridge modules and forms the foundation of any Rako scene-set system.
• For more information on dimming LEDs refer to Rako's application sheet ‘Controlling LED Lighting With Rako Dimmers and Modules'.