WHAT IS IT?
The RMT1200 in-line RF dimmer for GU10 LED lamps, tungsten, low-voltage halogen and other
Trailing Edge dimmable loads
A compact 1200w RF dimmer designed to be mounted in a ceiling void using an access panel or wall mounted in an electrical cupboard.
Trailing Edge dimming technology gives smooth quiet dimming of electronic transformer fed loads and maximises dimming performance of most GU10 LED down-lights.
The dimmer is connected in-line before the first lighting fitting to enable dimming of up to 1200w/1000va of
Trailing Edge dimmable loads.
Controlled from any Rako Rakom RF device, for example the RCP/RCM push button RF wallplates.
In Control
Designed to fit in a ceiling void using an access panel or an electrical cupboard, the RMT1200 capacitive dimmer can control up to 1200 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure.
The RMT1200 uses
Trailing Edge dimming technology to maximise the performance of most GU10 dimmable LED down-lights (refer to Rako Controls for compatibility and maximum loadings).
The RMT1200 is also the recommended dimmer for GU10 tungsten lamps due to its in-built shortcircuit protection, necessary with this style of lamps.
16 Scene memory capacity, can be fully integrated into Rako wired systems.
NOTE – THE RMT1200 IS NOT SUITABLE FOR USE WITH INDUCTIVE OR WIRE-WOUND LOADS.
Programmed using either an RCM/RCP RF wall-plate or RASOFT PC
Software suite, the RMT1200 stores the House, Room and Channel address plus 16 preset scene levels in a non-volatile memory.
The RMT1200 dimmer can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand-helds and Bridge modules and forms the foundation of any Rako wireless scene-set system
NOTE – THE RMT1200 IS NOT SUITABLE FOR USE WITH INDUCTIVE OR WIRE-WOUND LOADS. Please see RML-250, RML500 or RML1200 Dimmers
Technical Specification
Dimensions: 190x105x66mm
Input supply: 230V AC +/-10% 50Hz
Weight: 495g
Housing: UL V0 ABS
Climate range
Temperature: +2C to +40C
Humidity: +5% - 95% non condensing
Protection:
- Auto resetting over current protection
- Auto thermal shutdown
- Voltage surge protection
Load Types:
Minimum Load: 1w
Maximum Load: 1200VA Refer to Rako when dimming GU10 style LEDs
Terminal Sizes
- 2.5mm2 Stranded
- 4mm2 Solid
Connections: 3 way screw terminals for mains power
Cable entry: Bottom
Standards
Emissions: EN61000-6-3 : 2001
Immunity: EN61000-6-1 : 2001
Communication: Rakom coded fm radio, 433.9MHz
Memory: Flash memory (non volatile) Firmware upgrades via RASOFT programming
Software
Warranty: 2Year Return to Rako for Repair. Products older than 2 years can be repaired by Rako for a fixed fee of £50.
Simplify my Home are Authorised Rako Dealers
- Free Design Service - Call us to discuss your requirements or email us your lighting schedule/plans.
- Developer/Trade Pricing - Available upon request
- Support our clients - We offer on-site support and commissioning.
- Confidence in Quality - Our Rako Specialist has designed, installed and commissioned some of the largest Residential & Commercial Projects in the UK.
NOTE – THE RMT1200 IS NOT SUITABLE FOR USE WITH INDUCTIVE OR WIRE-WOUND LOADS.
£193.00 excl. VAT
Available for online purchase for Home delivery via Courier or Direct from Manufacturer/Distributor.
/2f3cbd6511494ad59905daafd66993b2.jpg)
/2f3cbd6511494ad59905daafd66993b2.jpg)
/694bbca056044bd0a003d37274c15ea7.jpg)
/007fe786d07a4da4bd0d247067e115b1.jpg)
/8d84ddfe49f7488788f87b9a23e3b594.jpg)