WHAT IS IT?
4 Channel dimming rack for 0-10v, DSI & dali broadcast lighting loads. Can also be used for mains non-dimmable loads. Stackable with other RAK4 units. Requires RAK-LINK for wired or RX-LINK for wireless systems.
A four channel dimming rack, designed to be wall mounted in an electrical cupboard.
Incorporating the latest dimming technology. Each of the four channels can independently control
0-10v, DSI or
dali dimmable lighting load or switched circuits.
The dimmer has four separate dimming channels that can control a total of 2400w of lighting.
The RAK-4F requires a separate controller/receiver which connects using standard CAT5 RJ45 sockets.
Controlled from any Rako Rakom RF or WIRED device, for example the RCM or WCM push button wall plates.
Central Control
- RAK-4F dimmer units can be used as simple 4 channel packs or joined to form multi-way stacks. 8, 12 and 16 channels stacks can be formed using the wireless receiver RxLink or up to 32 channel stacks using the wired system RAKLINK.
- The RAK-4L units are designed to be centrally located in an electrical cupboard, utility room or garage.
- The RAK-4F 0-10v, DSI or dali dimmer can control up to 2400 watts of dimmable lighting loads.
- Larger loads maybe controlled with the use of external mains contactors.
- Microprocessor control combines smooth reliable dimming with dynamic safety features such as auto-resetting over current, temperature shutdown and voltage surge protection.
- The RAK-4L dimmer requires a separate Rako interface for control. Either the RF receiver (RxLink) or the WIRED controller (RAKLINK), these units communicate using a single CAT5 RJ45 patch lead.
- The RAK-4F dimmer can be used seamlessly with other Rako modules, such as RDL in-line dimmers, RCM/RCP wallplates, RAH hand helds, timeclocks and forms the foundation of any Rako sceneset system.
- Each RAK-4 box needs to be fed by a 10A Type B MCB.
Technical Specification
Dimensions: 193x253x110mm
Input supply: 200-260V AC 50/60Hz 10A Type B MCB protection required
Weight: 3.5Kg
Housing: Powder coated galvanised steel
Climate rangeTemperature: +2C to +40C
Humidity: +5% - 95% non condensing
Connections
- 3 way screw terminal for mains supply (LNE)
- 4 way screw terminal for load outputs (4x L)
- 8 way screw terminal for control cables (4x 2Pair Signal Cable)
- 2 RJ45 sockets for Rak-Link or RxLink connection
- 7 way screw terminal block for Neutral connections
- 7 way screw terminal block for Earth connections
Protection
- Auto resetting over current protection
- Auto thermal shutdown
- Voltage surge protection
Load Types
Minimum load: N/A
Maximum Loads
Total box load: 10A, 2.4kw/2.0kva
Maximum load over 1+2 or 3+4: 1.5kw
Terminal Sizes
- 2.5mm2 - Stranded
- 4.0mm2 - Solid
Standards
Emissions: EN61000-6-3 : 2007
Immunity: EN61000-6-1 : 2007
Cable Entry: 10x 20mm top and bottom
Memory: Flash memory (non volatile)
Warranty: 2Year Return to Rako for Repair. Products older than 2 years can be repaired by Rako for a fixed fee of £50 (Current as of 2019).
Simplify my Home are Authorised Rako Dealers
- Free Design Service - Call us to discuss your requirements or email us your lighting schedule/plans.
- Developer/Trade Pricing - Available upon request
- Support our clients - We offer on-site support and commissioning.
- Confidence in Quality - Our Rako Specialist has designed, installed and commissioned some of the largest Residential & Commercial Projects in the UK.
/eba9f2e168cb4a40bb7e9c7c0a1ba766.jpg)
/eba9f2e168cb4a40bb7e9c7c0a1ba766.jpg)
/be144ec6eddb467abaffeb9359e4f94d.jpg)
/9313ffee3eb94ba3a0e41be03f1ddc83.jpg)
/3c5821c7b8264b28b5b34b1d5839d84e.jpg)
/007fe786d07a4da4bd0d247067e115b1.jpg)