Description
The CLG-W12 is a passive subwoofer. Optimised for discreet
sub-surface installation, its proprietary Monitor Audio bandpass design
incorporates an internally loaded 12” c-cam driver which sits in a waterproof
rotationally-moulded polymer enclosure buried below the garden surface - only
the CLG-W12’s domed output port is visible. From this little ‘chimney’
powerfully taut bass frequencies will join the clean mids and highs of the
surrounding CLG140 satellites for punchy and articulate full-range garden
sound.
The
CLG-W12 can be powered from a single amplifier channel at 4 ohms, with its
70/100V line option recommended for cable runs over 10m (30ft) and for adding
subwoofers to the system. In this line configuration, the CLG140 satellites are
daisy-chained to the CLG-W12, one after the other, up to a recommended maximum
of twelve per subwoofer. System expansion to larger garden spaces simply
involves the addition of amplifier channels, subwoofers and satellites.
In
the simplest designs, satellites are connected in a mono configuration to one
amplifier channel, the other channel powering the subwoofer. The use of a
stereo power amplifier with 70/100volt line capability and crossover features
will allow the adjustment of levels between bass and mid-high range. Alternatively,
the system can be designed to provide stereo operation by adding elements to
create left/right zones.
When
installed the Climate Garden System delivers a smooth, wide-open and controlled
frequency response from 30Hz to 30kHz in the targeted environment: better than
many home audio systems! For patio or deck applications, the CLG-W12 will
install within a planter box to enhance Monitor Audio’s CL Series all-weather
cabinet speakers with deep bass frequencies, giving custom installers
additional design options.
Technology
- Below ground garden installation. On patios or
decks will install within a suitably sized planter
- Extended response down to 30Hz
- Long throw 12” sub-woofer driver featuring
c-cam cone technology and rigid die-cast chassis
- Bandpass cabinet enclosure delivers high
efficiency and punchy, extended bass
- 70/100V and 4 ohm tap for flexible system
design: additional units can be added and ‘daisy-chained’ together
- Robust moulded cabinet: strong and waterproof
with fewer joints to compromise structural integrity
- Certified to IP54 Ingress Protection rating
- Dark brown finish blends with garden colours
- Applications: garden, deck and patio, theme
parks
- Dark Brown finish blends with garden colours,
but enclosure is paintable to blend with alternative settings
- Applications include garden and deck areas:
system expands with garden size
- PTC protection against power overload
Specification
Frequency Response (-6dB): 30Hz – 100KHz
Power Handling (RMS): 250 W
External Dimensions, excluding spike/ mount (Diameter x D): 750 x 380 x 505.5mm (19 1/2 x 14 15/16 x 19 7/8 inches)
Amplifier Requirements (RMS): 100-250 W
Sensitivity (1W@1M): 87 dB
Drivers Unit Complement: 1 x 12”
c-cam cone, long throw sub-bass driver
Maximum SPL (single unit in free space): 110 dBA
Weight: 19.5kgs (42lb 14oz)
Crossover Recommendation: - using an AVR 100Hz at a minimum of 12dB/Octave (24dB/Octave optimum)
Dispersion: 60°
Connection : Encapsulated cable connection
Environmental Protection Rating : IP54
Finishes Available: Brown
This item is not available as “add to cart”, due to either manufacturer restrictions or the product requiring professional setup, therefore we offer an installation and setup service in London & Surrounding areas, depending on the products required and the value of your order we can offer Free Installation services.